Bambu Lab

লোকাল MQTT-এর মাধ্যমে আপনার Lock Screen-এ লেয়ার সংখ্যা, নোজল তাপমাত্রা এবং ETA সহ 3D প্রিন্ট অগ্রগতি ট্র্যাক করুন।

How It Works

The pushward-bambulab bridge connects directly to your printer over local MQTT (no cloud dependency) and streams print progress to PushWard.

MQTT connection -- connects to printer on port 8883 using TLS with the printer's access code
State tracking -- subscribes to printer reports and merges delta updates into a full state
Progress updates -- sends layer count, nozzle temperature, and progress bar to PushWard every 5s (configurable)
Lifecycle management -- automatically starts tracking when a print begins and ends when it finishes, fails, or is cancelled

Setup

1. Enable Developer Mode

On your Bambu Lab printer, enable Developer Mode (or LAN-only mode) in the printer settings. This allows local MQTT connections.

2. Get the Access Code

Navigate to Settings > WLAN on the printer to find the 8-character access code.

3. Get Your Integration Key

আপনার ডিফল্ট hlk_ কী খুঁজে পেতে PushWard অ্যাপ খুলুন → Settings → Integration Key।

এই ইন্টিগ্রেশনের জন্য একটি ডেডিকেটেড কী তৈরি করতে:

Settings → Manage Keys-এ যান
+ ট্যাপ করুন
নাম সেট করুন (যেমন "Bambu Lab"), নির্বাচন করুন , স্কোপ, এবং ঐচ্ছিকভাবে সীমাবদ্ধ করুনbambu-*
তৈরি করা hlk_ কী কপি করুন

4. Deploy the Bridge

docker-compose.yml

services:
  pushward-bambulab:
    image: ghcr.io/mac-lucky/pushward-bambulab:latest
    environment:
      PUSHWARD_URL: https://api.pushward.app
      PUSHWARD_API_KEY: hlk_YOUR_INTEGRATION_KEY
      PUSHWARD_BAMBULAB_HOST: 192.168.1.100
      PUSHWARD_BAMBULAB_ACCESS_CODE: 12345678
      PUSHWARD_BAMBULAB_SERIAL: 01S00A123456789
    restart: unless-stopped

ℹ তথ্য

No ports need to be exposed -- the bridge connects outbound to both the printer (MQTT) and PushWard API.

Configuration

এনভায়রনমেন্ট ভেরিয়েবল	বিবরণ	ডিফল্ট
`PUSHWARD_URL`	PushWard server URL	--
`PUSHWARD_API_KEY`	Integration key (`hlk_` prefix)	--
`PUSHWARD_BAMBULAB_HOST`	Printer IP address or hostname	--
`PUSHWARD_BAMBULAB_ACCESS_CODE`	8-character access code from printer Settings > WLAN	--
`PUSHWARD_BAMBULAB_SERIAL`	Printer serial number (15 characters)	--
`PUSHWARD_BAMBULAB_CERT_FINGERPRINT`	Optional SHA-256 fingerprint of the printer cert (hex, with or without `:` separators). Pins TLS to that exact cert. When unset, the bridge auto-pins on first connect (TOFU).	--
`PUSHWARD_POLL_INTERVAL`	How often to send progress updates	`5s`
`PUSHWARD_PRIORITY`	Activity priority (0-10)	`1`
`PUSHWARD_CLEANUP_DELAY`	How long the activity stays after ending	`15m`
`PUSHWARD_STALE_TIMEOUT`	Ends activity if no updates received	`60m`

ℹ তথ্য

To pin explicitly up front (recommended for hardened setups), extract the printer's SHA-256 fingerprint from a trusted network and set PUSHWARD_BAMBULAB_CERT_FINGERPRINT:

openssl s_client -connect <printer-ip>:8883 -servername <printer-ip> </dev/null \
  | openssl x509 -fingerprint -sha256 -noout

Run this on a network you trust — TOFU (auto-pin on first connect) and ad-hoc fingerprint extraction are both only as trustworthy as the network at extraction time. openssl will print "verify error" lines for the printer's self-signed cert; those are expected and the fingerprint output below is still valid. The fingerprint changes any time the printer regenerates its cert (e.g. after a factory reset).

Print States

Printer State	Live Activity	Color
`PREPARE`	Preparing...	Blue
`RUNNING`	Layer N/M	Blue
`PAUSE`	Paused	Orange
`FINISH`	Complete	Green
`FAILED`	Failed	Red

💡 টিপ

The bridge automatically resumes tracking if it starts while a print is already in progress, so it recovers gracefully from restarts.

Activity Slug Format

Uses the format bambu-<serial> (serial lowercased), e.g. bambu-01s00a123456789. One activity per printer.